I had cut off the PTO drive shaft seal from my RXT 215 and only afterwords discover it was $163.00 to replace that part. In this video, I show a technique to fix and repair torn, worn and damaged rubber parts. I used an old bellows part from the jet ski. There are only two materials required and are listed in this clip. The end result is amazing and super tough.
Views: 24284 JetskiDetailing
I'm a wave jumper and played hard with my supercharged sea-doo RXT, then broke it. LoL So trying to save many dollars at the clinic, I did some research in attempt to fix the motor on my own, and this is my first experience working on this type of motor. I have documented the removal and flushing based on some instructions from others, so if you have advice to offer, please post. I'll be documenting the reinstallation and water testing once I do it which may be in the spring of 2011. (This clip is in two parts)
Views: 36012 JetskiDetailing
Having done a print test before getting started, I noticed the Magenta had bled into the yellow side. Once I opened the printer and examined the damper, I could see it was 1/2 mixed (contaminated). It was a situation I would have to attempt myself as the tech guy is a 10 hr. round trip. So I thought to shoot some video of the process and upload it if I succeeded. Well, I did, so here is that video. NOTICE Please be careful when doing your own repair work. This information is not professional, but to share with others in the event they encounter such a situation under similar conditions.
Views: 9820 JetskiDetailing
This movie animation was created based on crude 2D images from polarized imaging. Electricity is sent into the ground then interpreted into scenes that viewers can better understand. The graphics and scales are accurate. Many effects were added to enhance the overall experience.
Views: 19991 JetskiDetailing
Some quick tips to install those long graphic panels on your boat.
Views: 3680 JetskiDetailing
Made this quick video to help others who may experience this common problem. If you start your sea-doo and it won't start, but you hear a click, that is the solenoid. Chances are, it simply needs replacing. If it is not a solenoid issue, check your wires. If all else fails, you might try jumping the terminals to starter, or, decide to remove the starter for a bench test. Starters can be rebuilt by most efficient local alternator/starter rebuild shops. So check that out before you buy new.
Views: 53311 JetskiDetailing
Part 2 of R&R sea-doo RXT 215 motor and supercharger. This was my first time doing a job like this, and thank the members in the GreenHulk forums for offering advice and tips. If there is anything I missed, or am not doing properly, please let me know so I can make the corrections and share with others.
Views: 28765 JetskiDetailing
This short tutorial is on saving money. Lots of money! Starter was dying and had left me stranded on the water twice, so looked into the cost of a new one which was $450.00 Canadian dollars and decided to bring it to a local auto electric shop. They managed to fix it for $100.00 and it works just great! Visit us at: http://www.jetskidetailing.com
Views: 73306 JetskiDetailing
Here is a 2011 version of prepping your new Hydro-Turf seat cover with silicone before installation. This will keep your foam rubber dry, light weight, and keep your butt dry as well when out in shorts. JetskiDetailing.com
Views: 24835 JetskiDetailing
Here are two enhanced Roland Ecosol printers with internal illumination installed. Very simple and inexpensive to do and offers a couple great advantages. And as I didn't fully trust the adhesive which came on the strips, I added a few 'drops' of clear silicone in areas unseen, just to be safe.
Views: 286 JetskiDetailing
With some imagination, picture a small boy walking the streets in Paris. He sees the top of a Faris Wheel jutting out above the roof-line of an industrial building, so he walks to that direction. Amazed of his discovery and having no money in his pocket, he sneaks in by crawling through the bottom of the big top tent. It is then that he discovers which tent he has entered and feels as small as a mouse. Enjoy .) (Music produced with Korg TR music workstation)
Views: 1005 JetskiDetailing
"I prefer dangerous freedom over peaceful slavery." -Thomas Jefferson December 22 2011, Toronto Ontario Constitutional Lawyer Rocco Galati explains the lawsuit against the Bank Of Canada and the Finance minister. Full press release: Canadian constitutional lawyer, Rocco Galati, on behalf of Canadians William Krehm, and Ann Emmett, and COMER (Committee for Monetary and Economic Reform) on December 12th, 2011 filed an action in Federal Court, to restore the use of the Bank of Canada to its original purpose, by exercising its public statutory duty and responsibility. That purpose includes making interest free loans to municipal/provincial/federal governments for "human capital" expenditures (education, health, other social services) and /or infrastructure expenditures. The action also constitutionally challenges the government's fallacious accounting methods in its tabling of the budget by not calculating nor revealing the true and total revenues of the nation before transferring back "tax credits" to corporations and other taxpayers. The Plaintiffs state that since 1974 there has been a gradual but sure slide into the reality that the Bank of Canada and Canada's monetary and financial policy are dictated by private foreign banks and financial interests contrary to the Bank of Canada Act. The Plaintiffs state that the Bank of International Settlements (BIS), the Financial Stability Forum (FSF) and the International Monetary Fund (IMF) were all created with the cognizant intent of keeping poorer nations in their place which has now expanded to all nations in that these financial institutions largely succeed in over-riding governments and constitutional orders in countries such as Canada over which they exert financial control. The Plaintiffs state that the meetings of the BIS and Financial Stability Board (FSB) (successor of FSF), their minutes, their discussions and deliberations are secret and not available nor accountable to Parliament, the executive, nor the Canadian public notwithstanding that the Bank of Canada policies directly emanate from these meetings. These organizations are essentially private, foreign entities controlling Canada's banking system and socio-economic policies. The Plaintiffs state that the defendants (officials) are unwittingly and /or wittingly, in varying degrees, knowledge and intent engaged in a conspiracy, along with the BIS, FSB, IMF to render impotent the Bank of Canada Act as well as Canadian sovereignty over financial, monetary, and socio-economic policy, and bypass the sovereign rule of Canada through its Parliament by means of banking and financial systems. ========= One of the greatest challenges to becoming Totally Free is to be able to think independently from everyone else.
Views: 178 JetskiDetailing