HomeТранспортRelated VideosMore From: 50sKid

All About BMW Scan Tools (INPA, BMW Scanner 1.4)

1032 ratings | 141534 views
This doesn't cover every BMW scan tool out there, just the two that I happen to own. You can get BMW Scanner here: https://goo.gl/BFZoAl You can get a K+DCAN cable here: https://goo.gl/CoE1to To find out more about DiS and Progman: http://www.bimmerfest.com/forums/showthread.php?t=561237 This video is for entertainment purposes only. 50sKid assumes no liability for any repairs or modifications performed by the viewer as a result of the information contained in this video.
Category: Транспорт
Html code for embedding videos on your blog
Text Comments (245)
Hona Wikeepa (14 days ago)
What computer operating system are you using?
John Davis (17 days ago)
Can we use MAF reading to assess Turbo Charger ?
Julian McAlister (17 days ago)
If you could do a video of how you set up the drivers on your computer, that would be awesome. I got this scanner and was excited about doing some changes just to find I can’t find a driver for the actual scan tool itself. I’ve got the software ready to go, it’s the scanner that keeps saying it doesn’t have a driver for. I’m not sure if it’s something I’m doing or the software and tool isn’t any good. Mine looks just like yours but doesn’t have the sticker showing a BMW on the front. Any advice?
Patryk Zareba (18 days ago)
Hi there I like all yours video I learn a lots from yours videos.... What do you recommend to coding new LCM IN MY E39. ?
skulljer (20 days ago)
I realize you are just trying to help but fyi- if you let your master cyl go low enough to suck air into it ,most likely you wont get the air out without manually bleeding the mc by itself . Running the abs pump usually wont suck it off,I mean out-the air will be trapped in the master
404 GF (20 days ago)
I can’t install this on Windows 10. Will this work if I use a virtual machine
SpatrickTV (23 days ago)
Hello. How we can see the Error first date appeareance on the car? with bmw scanner 1.4 i want to see when has appeared the error for first time?
German Gedgauds (28 days ago)
I love what you are doing. Bless you!
ian young (30 days ago)
HI 50 kiD WHAT Scanner would you recommend for the new bmw, i have 2 x6 2011 and 2010 3.5 and 5.0, your recommendation would be greatly appreciated
Filip Cristian (1 month ago)
When you say they use a much more expensive cable where can you buy that cable at?
Ross Veressov (21 days ago)
its not just the cable, theres a multiplexer as well, you can buy it from BMW agents directly, it comes as a set.
anonymous user (1 month ago)
Great vid. Finally got it to download but what now lol. Can you make a video preferable with a 2011 e90 with n52 engine or any bmw about INPA. How do we use the software to diagnose issues like fuel trim, maf , 02 sensor to find issues with the car? What should 02 sensors or maf sensor be reading how to get to each menu. There's nothing on youtube in regards to simple diagnosis. Thanks in advanced
Hi, I have a 2001 BMW 330i. I am told that my transmission needs to be changed because the transmission computer isn't working. By 2 BMW / German car repair shops. Is the transmission computer inside the transmission to where I have to change it or can I reprogram or purchase in transmission computer separately? I would really appreciate the help in clarifying this thank you. And thanks for your videos.
SSJGohanMlm (1 month ago)
DIS is an old ass software. Go big or go home and get the ICOM and ISTA
shelby arndts (1 month ago)
I bought the INPA k+dcan cable and I found that I need to bridge pins 7 and 8 together. There are two sets of 8 pins: one set on the motherboard, and the other on the plug. Which ones do I bridge together? UPDATE: I'm getting the error "IFH-0009: NO RESPONSE FROM CONTROLUNIT. PROGRAM WILL BE STOPPED!" What do I do?
Isreal Perez (1 month ago)
So I what windows program are you using XP 7 8 or 10 and and as well as the bits 32 or 64-bit I just also need to know do you have a Oracle on how to install this right
Touring USA (1 month ago)
Can EWS and DME be re-synced with either of these pieces of software?
Peter Lachina (2 months ago)
When i buy the K+DCan cable, will connecting the cable automatically install the INPA software or do i download it somewhere else? Wich is the most cost effective software to register a new battery, i have seen DIS, INPA, NCS EXPERT, NOW, bmw scanner cable. please and thank you!
Nick Littlewolf (1 month ago)
one purchasing a k+dkan cable is should come with cd with inpa software v5.0.2and or v5.0.6 also has instructions in a pdf file i believe on how to install.
rebel e46 (2 months ago)
Does the engine have to be to scan your car?
Isreal Perez (2 months ago)
What os on you're computer for this to work
David Nguyen (2 months ago)
Hi Jason, I need help with my e60 M5. I’m trying to determine what code 279D is, it sounds like it has to do with my electric fan final stage. But I’m not sure. I’ve read online that it could be the relay. Or some electrical problem. Here’s why I think that, I just changed my gas tank vent valve because of code 273c. I cleared the code but it came back on. I also had code 2b52, for electric transmission oil pump, I couldn’t locate the unit next to my 6 speed transmission. So I clear the code and it didn’t come back on. I talked to the part guy at the dealer he said the unit is on passenger side of the transmission I checked but didn’t see it. Now, I’m not sure what to do. The car has 93K miles. I don’t mind changing parts but when the part is changed the code should clear out but it didn’t, I’m thinking it could be an electrical problem.
sgfreak96 (2 months ago)
Question, for the vanos. Should those numbers match up 100% exactly? Mine are off in small amounts. I can upload a video if you wouldn't mind checking.
greg galicia (2 months ago)
50skid, I am having a level control system malfunction. Been to two independent dealers and they could not figure how to recode this thing. e70 X5. I need to reset the ride height. Does this have that capability on any of these two scanner?
Reno Balkanac (2 months ago)
Do you know if the battery can be programmed with any of those two softwares? 2003 x5.. 4.6is Thanks
Mario (2 months ago)
My version of INPA had far less stuff (for e46 N46B18 engine). Any clue if different engines might have more or less tests etc?
Ben Crosbie (2 months ago)
Had a new abs module changed and brakes all good working order but the abs light wont clear off! Maybe it needs coding? whats the best cheapest kit to go for?
50sKid (2 months ago)
inpa
Carlos Largaespada (3 months ago)
Hey 50's kid, I'm a big fan of all your videos. Than you for all you do!
Theresa Fallon (3 months ago)
I put a new(er) transfer case actuator arm on my 2011 BMW X3. The dealer wants $2,200 to replace and reprogram. Can one of these tools reprogram it?
Serkan Varol (3 months ago)
What do you think about foxwell nt510? Have you ever used it?
Russ Weed (3 months ago)
Changed the valve cover gasket on my 2007 328xi now need to reset the Vvt , which software and wire would be best thanks, great video, and what version of windows? Thank you
John towers (3 months ago)
How the oil and service intervals can be set or modified with pasoft for like 7000 miles instead of the long 15000??
Carlos Martinez (3 months ago)
Im starting to fix cars, what kind of scanner do u recomiend for any cars.so it can read abs, airbag, transmission and engine. Thank you
ygtcbee23 (1 month ago)
Thanks for the video! In the nes video will you include Rhiengold software overview for these cables?
50sKid (3 months ago)
I'll have a review coming up on one you might be interested in
Venkatesh Rajagopalan (3 months ago)
Does the BMW scanner cable + software work on F10 or F30 models? can it be used to detect the actual mileage of the car (I mean if tampered)
puttitat2 (3 months ago)
You do realize that BMW scanner van code as well, right? Just double click the module shortcode. It's SO easy with that software.
Nhyiraba Latif (4 months ago)
Hi please can you recommend a newer scan tool of this one that can support latest BMW vehicles?
Andi Selaj (4 months ago)
Just to clear up the general confusion that surrounds the Fuel Trims: Adaptiv Fuel Trim - Low engine load - Low engine speed Multiplicative Fuel Trim - Medium engine loads - medium engine speed Both of these are long term and integrator is the short term fuel trims. As for WOT operation the engine doesn't use closed loop, but defaults to a pre-programmed map for WOT and runs the engine rich.
Carlos Morgan (5 months ago)
Beware do not buy cables/software from www.bcables.com Does not work Garabage from there
sledge beast (5 months ago)
Does the INPA "activate" section you were showing allow  turning on/off the cooling fan?
mehdi a (5 months ago)
Are you able to check the engine oil level using INPA software?
Leo Saenz (6 months ago)
What about Mini Cooper??
joyce liz (4 months ago)
Try it foxwell nt510bmw, it can scanner mini cooper
MrPitatom (6 months ago)
Hi 50's kid. I have the D-Kcan cable. I can use this on my 320ci E46, my 745li e66, and my e70 X5. I connected the cable to my daughters boyfriends 330i E46, and DIS could not automatically identify the car. When I did a manual scan, it only could communicate with the DME module. All other modules could not be detected or scanned. Same thing using INPA. Do you have any thoughts on the matter? Cheers.
Ivailo Dombev (2 months ago)
Make sure you are running Windows XP (You can make a virtual machine with WinXP and share your USB Ports). For the e46 the K+DCAN cables need to have their 7 and 8 pin connected so the software can communicate with the vehicle. Have in mind that this will make the newer models unreadable. (If you can make a switch which connects pin 7 and 8 and when you need to scan older vehicles just turn it on, if you need to work on newer cars switch it off) I am not sure if I explained it good enough.
Mihai Vlad (6 months ago)
inpa is not for bmw e36?
Ben Wall (4 months ago)
INPA doesnt really program (from what I know). You need NCS Expert to change the parameters in the BMW computer systems. INPA can clear codes and check all kinds of cool stuff, but NCS Expert is for coding. Yes, to code E36 I believe you need a proper ADS interface (read, cable). Generally these are connected to real serial ports (not a USB to Serial converters).
Mihai Vlad (4 months ago)
Ben Wall i know cables FOR e36 is different, but the program is working ? On e36?
Ben Wall (4 months ago)
Mihai Vlad INPA definitely is for E36. I use it on E36 and E46, but the cables are different. If your E36 has the Pac man connector under the hood, you need an ADS cable. Google for "tiny ADS" (https://openlabs.co/projects/Tiny-ADS-Interface) . Some guy makes a board for it that is like the obd2 port cable shown at the front of this video.
Deiwux Cepka (6 months ago)
Hi,how to change inpa errors language in english?
Anh Bui Tho (6 months ago)
What a good guy, Thank for sharing and your funny at the end of video.
uldis zauers (6 months ago)
i got DCAN cable ant cant get on it in windows10 any help
Ivailo Dombev (2 months ago)
Make virtual machine with WinXP to get it running
A Woodman (7 months ago)
What is the best scanner to tell me what wheel sensor is out
50sKid (7 months ago)
INPA
Rusmir Hrkic Rusko (7 months ago)
Thanks for the video.I just play with some cables in my car,and now I have Airbag light.Can I turn off that light with this cable and software on my bmw 1 e87 from 2006?
Dopamine P (8 months ago)
Do these work with macbooks?
50sKid (8 months ago)
no you'd have to run a virtual machine with virtualbox
Jp Coward jr (8 months ago)
can you use any OBDII scanner on the E46 BMW?
50sKid (8 months ago)
yes
Star Ships (9 months ago)
howcome you had misfire on cylinder 4 and 2?
Natalie Jane (9 months ago)
Hi Jayson, im planning to take my e46 2001 for emission it has no plate yet. im suspecting that my 02 sensor might fail? (i just said it might fail cause previous owner didnt replace it and i cant put it on the road so im assuming it will fail no way to drive on actual road? i cannot put it on the road cause it has no plate...so i cant put 02 sensor to work that good. but i do have INPA do you think just by using INPA i could determine if my 02 sensor fails? correct me if im wrong but to test 02 sensor does it really need to put in the road? or could i just rev my car and warm it for a while in the garage and hook my INPA to test my 02 sensor? if possible? what are the thresholds of a good o2 sensor? thank you very much.
50sKid (9 months ago)
You don't have to drive it, you can just run it. Yes you can use INPA to see if the O2s are working. A good precat O2 sensor will cycle between 0.1v and 0.9v.
War Cry (10 months ago)
Hey 50s kid I have a 325 an did a 330 swap do u kno how to flash the 325 ecu to b a 330 ecu?
Taurus Dowdy (10 months ago)
50s Kid can i use anyone of the cables to register my battery in my e65?
Taurus Dowdy (10 months ago)
Thanks
50sKid (10 months ago)
You should be able to do that in INPA
Quartz Nation (10 months ago)
Which one can reset the battery adaption..when you change out the battery it needs to be reset as you know..and which one can also program the locks to automatically lock after driving from a start position? Thanks cool vid
minidonyel (18 days ago)
Quartz Nation
Ivailo Dombev (2 months ago)
You can code it with NCS Expert. A lot of information on the forums - bimmmerworld, e46fanatics. It's easy if you know what you're doing. For the NCS Expert you will need the K+DCAN cable with the INPA software(They come in pairs)
Alex O'Dell (8 months ago)
Quartz Nationz The e46 model in this video does not need to be coded. The e90 does however...
joe G (10 months ago)
How about galletto 1260
n444YY (10 months ago)
Does INPA works for e39? i got 2 of em, a 96 and a 97
Bmw M3 e46 (9 months ago)
yes
Gregory Brown (10 months ago)
Hey bought one of these software for my windows 10 and I somewhat got it to execute. I plug it to the OBDII connector and witching 10 min my car battery was drained. Has anyone else had or have this issue.
Bill Bhadal (11 months ago)
Is there any way you can code BMW Mini one r56 2007 ABS pump with INPA
50sKid (10 months ago)
yes
blackpassenger (11 months ago)
by the way, just discovered those hidden OBC test functions. do you know anything about them?
Axel Hil (7 months ago)
Hi! This is hidden function that is provided by board diagnostic computer. It gives you general information
blackpassenger (11 months ago)
whaaaaaat? you dont know about the OBC test functions? https://www.youtube.com/watch?v=twM7NchxjXI
50sKid (11 months ago)
whatchoo talkin bout?
blackpassenger (11 months ago)
cool. gotta get the inpa scanner. my fuel consumption suddenly increase. I threw in some new plugs and its still burning a lot of gas. about to replace the fuel filter. any other suggestions? no check engine light, no misfire. still runs fine, except for the increased fuel consumption
blackpassenger (10 months ago)
just replaced my fuel filter with your direction from another of your vids. the contents of the filter was filthy (pun intended) and gas mileage went back to normal. oh and i finally got the hidden obc to function properly. https://www.youtube.com/watch?v=twM7NchxjXI
blackpassenger (11 months ago)
cool
50sKid (11 months ago)
Start watching my fuel trims videos and common vacuum leaks videos and so on. Dig into this area of diagnosis and you'll get the tools to find your answer
blackpassenger (11 months ago)
how do i correct that? it just started happening suddenly.
50sKid (11 months ago)
You probably have high fuel trims causing increased consumption.
Spartan (11 months ago)
Could I use my BMW 1.4 scanner for INPA?
50sKid (11 months ago)
afraid not
valleynomad (1 year ago)
Thanks for very informative video. But they seem to be for E series. Are there similar ones for F series? I know about ISTA+ (i.e. ISTA-D). But it is too CPU-intensive for my laptop. I am looking for something lighter.
50sKid (1 year ago)
ISTA is the only thing I know about
Thieu Bui (1 year ago)
Do you know where I can get a copy of the inpa installion? I bought the k cable but the install disc doesn’t want to read? Do you know if the scanner 1.4 read the 7 series e66?
50sKid (1 year ago)
I actually have a video now on how to install inpa -- search my channel to find it.
Sparky Patriot (1 year ago)
Did the BMW Scanner 1.4.0 plug connect to the OBD-II port under the dash, or the BMW service port under the hood?
50sKid (1 year ago)
+Sparky Patriot obd
carlose0826able (1 year ago)
Can you also reset the seat belt light ?
carlose0826able (1 year ago)
Can you use this to do any sort of tuning ?
Superjayjaysaiyn (1 year ago)
im stuck in transport mode.....my radio turns off and central locking dont work.....need help with installed inpa....ty
jongkeun lee (1 year ago)
hi 50 kid. thx for newly updated videos. Wondering do one of these scanner remove air bag warning sign on the cluster? I removed air bag to do something and plug back one of the plug wrong way. Now I have air bag warning light. thx
jongkeun lee (1 year ago)
50sKid hi 50 kid. thx for response. I got into eBay and checked BMW 1.4.0 OBD and found that it supports 2001 to 2002. Mine is 2004 e46 which means that it is not going to work?.
jongkeun lee (1 year ago)
50sKid thank you
50sKid (1 year ago)
Yes both INPA and bmw scanner can reset the airbag lights.
Ahmed Ibrahim (1 year ago)
thank you so helpful can i use inpa software by bmw scanner cable or versa?!
bob campbell (1 year ago)
50s Kid hi,   I apologize but I could  not find  any of your videos on airbags, so I felt this area was closest to my problem.My wife took our 330 bmw (2001 with 81,000 mile, purchased new) into Center BMW in Van Nuys for the free airbag switchout required by the recall.  When she got the car back the radio light would not come on.   So she drove out the exit and right back into the entrance and complained but they refused to correct their error saying they did nothing having to do with the radio.  So we all know those wires run behind the dash and all over the place.   With something like this, how would you go about handling it?  What is the likelihood that this issue is just co-incidental? bob
bob campbell (1 year ago)
50s Kid hi... when your radio went dead, though in this case it is just the radio display light, how did you fix it.  Also the mechanic told my wife he never disconnected that battery when changing the new air bag.  This is a violation of bmw protocols.  What do you think?  bob
50sKid (1 year ago)
It kind of sounds co-incidental. The display on my original radio went dead at some point too.
bob campbell (1 year ago)
50s Kid Hi and thanks for being there in the o-zone.   I am going to need to update my DME program.  I live in the Lake Balboa area not too far from you.  Is there an INDY shop that can do the update instead of having to take it to a dealer.  Can you give me a recommendation.  2974 code problems...     Thanks bob
50sKid (1 year ago)
I really don't know of any shops that I can personally recommend, but I do see all sorts of "bavarian" places around here. Just do some searching and call them up and ask if they can update your DME and how much it'll cost. Most of them probably can.
Have you ever used or any opinion with the....Bavarian Technic Basic Cable. I am trying to figure out which one to buy for a Twin Turbo 2008 335XI E90 model.... Thanks and nice clear video...
50sKid (1 year ago)
never heard of it
sirNemanjapro (1 year ago)
Please do a video on Coding.
Matthew Scheffler (1 year ago)
hey what do the 7 and 8 pins look like in the cable is it a 8 pin delete model a 7 and 8 connected or 7 and 8 independent.
Carol Gowie (1 year ago)
Brake light
Gary Yung (1 year ago)
Awesome video, I just bought two obd2 read scanners for code reading, Autel Maxiscan MS300 and MS509 for factory specific code reading. Works well but cannot do reprogramming like changing the values. The Autel tablet models, higher end units can check for like power window malfunction and steering angle sensor all that. Your units are great value, I should get them too. Great video thanks
STANLEY MOISE (1 year ago)
Nobody who’s making this video provides no links on where to download these softwares. You guys sucks.
50sKid (1 year ago)
google is your friend. If I can find it, you can find it.
Sroor9001 (1 year ago)
I got inpa scan information on German how to change it to English ?
Bmw M3 e46 (9 months ago)
or you can get a translator app that translates any words your cursor points to
greg h (1 year ago)
there must be a version for english speaking countries v.s germany. your version you demonstrated has alot of english mixed in with some german. he may have gotten a pure german version
50sKid (1 year ago)
It is factory software for germany so there is no English
Cole Hurtado (1 year ago)
Do these scanners work for a 07 335i e90?
TARZAN (1 year ago)
so what the hell do i do with my round obd on my 98 e39 saloon 😭
Enrique Inurrieta (1 year ago)
You buy the adaper cable: Trapezoidal at one end, 16 pin round OBD II plug. Loads of them on EBay
Sroor9001 (1 year ago)
50sKid hi 50s kid I want to you to make a video how to connect this cable to dis it's working with inpa flawlessly after welding point 7&8 but for dis I've seen you have to go for calibration screen then go to easy edibas but it's not working it give me calibration screen and stuck on that I have Windows 7 32 bit and dis 57 and always getting no connection and low voltage check battery so how to solve this hope you make a video for this
TARZAN (1 year ago)
sweet man i have this dumb fingle flash sytem atm counting how many flashes then finding them on the codes list is so crappy..
50sKid (1 year ago)
They make an adapter for it. You can get them on eBay.
David Westernall (1 year ago)
Not sure if you are interested as this is an old video but some out of date stuff here. INPA, DIS, PROGMAN etc are very old and we do not use them anymore, ista/p and ista/d replaced them around 2011. The cable we use is an ICOM (several versions of these, newer models need newer versions) and they connect over IP. The cable from eBay acts as an ICOM emulator over serial, ISTA/D and /P are slow over ICOM, over emulated serial they would be really bad.
David Westernall (1 year ago)
Not sure how much fun you will have with ISTA, especially on the diag side; you're certainly a get stuff done no nonsense type of person and the people that wrote ISTA were the opposite. ISTA/D however does contain the full TIS documentation. ISTA/P however is far better than progman for programming and coding. For an ICOM the ICOM A2+B+C will be best, you only need ICOM Next if working on 2012+ cars.
50sKid (1 year ago)
Yeah a couple of people have told me about ISTA and I have yet to sit down and play around with it, but I will in the near future and do a video on it as well. Thanks for the info about the ICOM cable.
joseph taye (1 year ago)
Does impa software work with Apple laptop?
50sKid (1 year ago)
No it's for windows
Steven B2 (1 year ago)
2 bad I haz OBD1 :-(
FASTFUN (1 year ago)
Should both my up stream o2 sensors have the same readings.  I have p2098 and p1111
Young 23 (1 year ago)
when buying either of these cables, how do you obtain the software on your computer so you can diagnose the vehicle? i have an e39 1998 528i bmw
50sKid (1 year ago)
google the software--you've got to figure that part out by reading the forum posts
Robert Ortiz (1 year ago)
Hey 50skid do you have an email? I can email you a video and you give me your idea on what my problm could be. Seem my e46 it's on limp mode wount rev past 3k rpms wount go over 40mph
50sKid (1 year ago)
http://amzn.to/2oFca1y
50sKid (1 year ago)
Send me the video on facebook. But if your transmission is in limp mode then you need to use a bmw scan tool to read the errors
Zack Lee (1 year ago)
Hi Guys, will the scanner 1.4 work on a 2003 E39 530i? Contacted a couple of seller on eBay and all said NO! Please advise. Thanks
50sKid (1 year ago)
Yeah it should work
Luis Vega (1 year ago)
Hi 50's Kid I just have a question for my Honda civic hybrid 2004 i know the probable is not your strong side but can you help some how to see if there is a filter the you need to replace in this transmission car and if you can help me with steps how I need to do it. Also your videos are helping me a lot with my BMW 330i ZHP 2004 I thank you so much.
50sKid (1 year ago)
I'm afraid I'm unfamilar
Ismail El Ridi (1 year ago)
Hi 50sKid, from where di you get that version of INPA in English?, the only good working version i was able to find was in German
50sKid (1 year ago)
Search the forums, bimmmerworld, e46fanatics.
Tina G. (1 year ago)
i bought carly off amazon and it works great i even coded my alarm system super easy also used my cell phone no laptop
Shane Sexton (6 months ago)
Victor Gallegos yes it will, both Apple and Android.. it’s definitely nice to have with you on a long trip. I was 1200 miles way from home and my car’s electronics started flipping out with a message on the iDrive screen that said “electrical problem, do not drive car”. So I pulled out the Carly dongle and connected to my iPhone and determined that it was my RDC.. aka tire pressure monitor module which took several other modules down.. so I googled where it was and unplugged it.. all good for the trip home. It’s definitely good to have a scanner on hand with these newer cars.
Victor Gallegos (9 months ago)
Will it work on a tablet?
hvcool (1 year ago)
emmissions or transmission issue section ?
Chief (1 year ago)
Only watched to see coding options & you never even looked at them 👎🏻
50sKid (1 year ago)
I'll have to do a coding video with BMW scanner real soon.
Patryk Zareba (1 year ago)
i like all yours video Pal
Emil Iordache (1 year ago)
Hello. First of all I want to thank you for the content you are sharing with us, well explained diy's and great video editing skills. I am about to rebuild the disa valve, as I hear a really small rattle sound inside of the intake manifold. My question is, I can use inpa to check this? Or, when the engine is runing, I can just unplug and the sound should disappear? And if so, ecu will stock an error that will remains there even if I will plug it back? Thanks!!
Bilderberg CEO (1 year ago)
Will it reset limp mode, assuming the underlying problem has been fixed?
Bilderberg CEO (1 year ago)
Thanks!
50sKid (1 year ago)
yes
G VS (1 year ago)
do any of your scanners have the S62 motor scanning capability? Thanks
50sKid (1 year ago)
Yes they can all scan that engine
Win8pc (1 year ago)
I have a 28AE torque limitation code from bmw scanner that keeps popping up. I couldnt find any other info on the internet about do you know what that is?
supermarketsweeps (1 year ago)
its may of been mapped , if you can go to code you should be able to see when it happened freeze frame data , i see it a lot were torque is hitting its limits
50sKid (1 year ago)
I'm sorry I do not.
Alonso Basanez Weiss (1 year ago)
Hello, hey what do you know about ISTA-D
50sKid (1 year ago)
I still need to check that out
FahimMotoGP (1 year ago)
thanks good video for learners
duay duay123 (1 year ago)
Is there a avaiable tool to programm a e46 to beep if the key is inside the ignition keyholder?
Win8pc (1 year ago)
DME and EGS are grayed out for me and cannot be found
Win8pc (1 year ago)
solder pins 7 and 8 together, some ebay scanners do not come pre-soldered. Hope this fixes your problem!

Would you like to comment?

Join YouTube for a free account, or sign in if you are already a member.